MD6350 gold detector

 Performance and Features:

1. Mode—Indicates which of the five detection modes (Zero, Jewelry, Custom, Relics or Coins) has been  selected by highlighting the corresponding word on the LCD screen.
 2. Target ID Legend—Works in conjunction with the Target ID Cursor to indicate a target's probable  identity. Ferrous (iron) targets will indicate on the left half, non-ferrous targets that are thin or have low  conductivity will indicate in the middle, and thick or high conductivity targets will indicate at the right.
 3. Target ID Cursor (Upper Scale)—The Target ID cursor, in conjunction with the Target ID Legend, indicates  the probable identity of a detected target. The upper scale consists of twelve (12) graphic segments for Target  ID.
 4. Lower Scale—The lower scale, or Notch Discrimination Scale, indicates the discrimination pattern. The MD-  6350 will produce an audible target response for the pixels that are switched on, and no audible response for  those that have been switched off. The Target ID Cursor will always indicate all targets. The discrimination  pattern can be adjusted by changing modes and / or using the DISCRIM and Accept/Reject (√/×) pushbuttons.
 5. Coin Depth Indicator—The depth of a coin, or similar sized target, is indicated in 2-inch increments. Sweep  over the target with the search coil 1 inch from the soil to get the most accurate reading.
 6. Battery Level Indicator—Indicates the current battery condition. The detector will maintain full performance  until the batteries need to be replaced. Replace batteries when there is only 1 segment remaining. Ni-MH  rechargeable batteries may be used, but may have a shorter life per charge. You can expect 20 to 40 hours of  operation depending on battery type and quality. Access and replace the batteries by sliding the cover off the  control housing. Remove batteries when the MD-6350 will be stored for longer than 30 days.
 7. Sensitivity Indicator—The MD-6350 has eight (8) settings for sensitivity.

 Technical Parameter: